Content Source: 2019 Indian Rider’s Manual (9929709 R01) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Rear Shock Preload (Ride Height) Adjustment

Applies to: CHIEF MODELS

Image
  1. Park the motorcycle with the sidestand down on a firm, level surface. Remove all riders and cargo.
  2. Remove the seat. See Seat Removal.
    TIP
    Using the INDIAN MOTORCYCLE spanner wrench PV-46993 will make rear suspension adjustment significantly easier.
  3. The upper spanner nut on the shock is the lock nut . The lower spanner nut is the adjuster nut . Loosen the lock nut by turning it counter-clockwise (as viewed from the top of shock) with the spanner wrench.
  4. Spray a light lubricant on the adjuster nut where it contacts the spring.
  5. Adjust shock preload by rotating the adjuster clockwise (as viewed from the top of shock) to INCREASE preload (firm) or counter-clockwise to DECREASE preload (softer).
  6. Recheck the preload measurement after adjusting.
  7. Tighten the lock nut securely against the adjuster nut.
  8. Reinstall the seat.

© Copyright Polaris Industries Inc. All rights reserved.