Content Source: 2019 RZR Turbo / Turbo 4 Owner's Manual (9929631 R01) > Operation Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Starting the Engine

NOTICE
Do not apply throttle during or immediately after starting a turbo model. After starting the engine, wait 10 seconds to allow engine oil to circulate and lubricate the engine and turbo system.
  1. Position the vehicle on a level surface outdoors or in a well-ventilated area.
  2. Sit in the driver's seat and fasten the seat belt. Always make sure all cab doors are closed and latched when riding in this vehicle.
  3. Place the transmission in PARK.
  4. Apply the brakes. Do not press the throttle pedal while starting the engine.
  5. Turn the ignition key past the ON/RUN position to START. Engage the starter for a maximum of five seconds. Release the key when the engine starts.
  6. If the engine does not start within five seconds, return the ignition switch to the OFF position and wait five seconds. Repeat steps 5 and 6 until the engine starts.
  7. After starting the engine, wait 10 seconds before applying throttle.

© Copyright Polaris Industries Inc. All rights reserved.