Content Source: 2020 Indian Scout Bobber / Bobber 20 Owner’s Manual (9929432 R03) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Seat Removal – Scout Bobber

TIP
Use caution to avoid contact with the fuel tank when removing the seat.
  1. Grasp the front edge of the seat and pull upward abruptly to disengage the seat base grommet from the seat mount stud.Image
  2. Lift the seat to disengage the seat base from the rear frame.
  3. To reinstall the seat, make sure the tabs on the seat base fully engage the rear frame section, then press downward firmly at the front edge of the seat to snap the stud to the seat base grommet.
WARNING
If the seat is not aligned in a straight-ahead position, the grommet is not engaged to the stud. Make sure the grommet is fully engaged to the stud before operating.

© Copyright Polaris Industries Inc. All rights reserved.