Content Source: 2020 Indian Scout Bobber / Bobber 20 Owner’s Manual (9929432 R03) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Headlight Lamp Replacement

  1. The headlight bulb can be serviced and removed from the back of the headlight bucket without disassembling the headlight lamp.
  2. Disconnect the wire harness .
  3. Remove the rubber boot from the rear of the headlight.
  4. Squeeze the bulb retainer and move it away from the bulb. Remove the bulb.
    TIP
    Avoid touching a halogen lamp with bare fingers. Oil from your skin leaves a residue, causing a hot spot that will shorten the life of the lamp. If a lamp is touched, clean it thoroughly with denatured alcohol.
  5. Install the new bulb and secure the retainer.
  6. Reinstall the rubber boot, making sure it seals around the bulb and headlight.
  7. Connect the wire harness.
Image

© Copyright Polaris Industries Inc. All rights reserved.