Content Source: 2020 Indian Scout Bobber / Bobber 20 Owner’s Manual (9929432 R03) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Air Filter

Inspect and replace the air filter at the intervals specified in the Periodic Maintenance Table section. Inspect more often if riding in unusually wet or dusty conditions.
  1. Remove the seat. See the Seat Removal sections for details.
  2. Remove the fuel tank. See Fuel Tank Removal.
    NOTICE
    Use care to prevent debris from entering the air box when the filter is removed.
  3. Loosen the six (6) captive air filter screws and remove the air filter .
    Image

  4. Inspect the air filter. Do not attempt to clean the air filter. Replace a soiled or damaged filter with a new filter.
  5. Reinstall the air filter or install a new air filter.
  6. Torque screws to specification.
    TORQUE: 24 in-lbs (2.7 Nm)
  7. Reinstall the fuel tank. See Fuel Tank Installation.
  8. Reinstall the seat. See the Seat Removal sections for details.

© Copyright Polaris Industries Inc. All rights reserved.