Content Source: 2020 Scout/Scout Sixty Owner’s Manual (9929430 R03) > Features and Controls Chapter
| IMPORTANT |
|
The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual. Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com |
| Symbol | Switch | Description |
|---|---|---|
 |
Hazard Warning Flashers Switch | The hazard warning flashers switch activates and cancels the hazard warning flashers. See the Switch Functions section for details. |
 |
High/Low Headlight Beam Switch | The high/low headlight beam switch toggles the headlight between high beam and low beam. See the Switch Functions section for details. |
 |
Horn Switch | To sound the horn, press the horn switch. |
 |
Turn Signal Switch | Move the switch to the left to activate the left turn signals. Move the switch to the right to activate the right turn signals. A signal will deactivate automatically when speed or distance reach predetermined levels. To cancel a signal manually, move the switch to the center position and push it inward. Momentary Feature: Move the turn signal switch left or right and hold it in that position for at least one second. The momentary feature will activate and the signal will then cancel when the switch is released. If a bulb fails, the lamp flashes at more than twice the normal rate. |
 |
Stop/Run Switch | Press the bottom of the switch (RUN) to allow the engine to start and run. Press the top of the switch (STOP) to stop the engine. See the Switch Functions section for details. |
 |
Starter Switch | Use the starter switch to start the engine. The engine stop/run switch must be in the RUN position. See the Switch Functions section for details. |
© Copyright Polaris Industries Inc. All rights reserved.