Content Source: 2020 Scout/Scout Sixty Owner’s Manual (9929430 R03) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Removing the Seats

Seat Removal – Scout

TIP
Use caution to avoid contact with the fuel tank when removing the seat.
  1. Remove the bolts on the back of the seat using the included uni-tool.
  2. Remove the bolt behind the seat using the included uni-tool.
  3. Grasp the front edge of the seat and pull upward abruptly to disengage the seat base grommet from the seat mount stud.
Image
Image
Image
WARNING
If the seat is not aligned in a straight-ahead position, the grommet is not engaged to the stud. Make sure the grommet is fully engaged to the stud before operating.

Seat Removal – Scout 100th Anniversary Edition

TIP
Use caution to avoid contact with the fuel tank when removing the seat.
  1. Remove the two bolts holding the seat to the seat frame using the included uni-tool.
  2. Remove the four bolts holding the seat frame to the bike.
  3. If trying to access the battery, remove the two bolts holding the cover to the bike.
Image
Image
Image

Seat Removal – Scout 60

TIP
Use caution to avoid contact with the fuel tank when removing the seat.
  1. Grasp the front edge of the seat and pull upward abruptly to disengage the seat base grommet from the seat mount stud.
  2. Lift the seat and pull it slightly rearward to disengage the seat base from the rear retainer.
  3. To reinstall the seat, make sure the seat base engages the rear retainer, then press downward firmly at the front edge of the seat to engage the stud to the seat base grommet.
Image
Image
WARNING
If the seat is not aligned in a straight-ahead position, the grommet is not engaged to the stud. Make sure the grommet is fully engaged to the stud before operating.

© Copyright Polaris Industries Inc. All rights reserved.