/www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
Content Source: 2020 Scout/Scout Sixty Owner’s Manual (9929430 R03) > Features and Controls Chapter
IMPORTANT |
The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual. Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com |
Lamp | Indicates | Condition |
---|---|---|
Chassis Fault | The alert symbol illuminates if a chassis fault occurs. | |
Low Fuel | This lamp illuminates when about 1/2 gallon (1.9 L) of fuel remains in the tank. | |
Neutral | This lamp illuminates when the transmission is in neutral. | |
High Beam | The lamp illuminates when the headlight switch is set to high beam. | |
Turn Signal | The turn signal indicator flashes when the left, right, or both turn signals (hazard) are active. If there is a problem in the signal system, the lamps will flash at twice the normal rate. | |
ABS Not Activated (if equipped) | The indicator remains on until the ABS activates, which occurs when vehicle speed exceeds 6 MPH (10 km/h). When the lamp is illuminated, the anti-lock brakes will not activate, but the conventional brake system will continue to operate normally. | |
Check Engine | If this lamp illuminates while the engine is running, see your dealer promptly. The light will remain on if the tilt sensor shuts down the engine. If abnormal sensor or engine operation is detected the light will remain on as long as the fault condition exists. Retrieve the error codes for diagnosis. See Engine Error Codes. | |
Sidestand Light (if equipped) | The sidestand light will turn on anytime the sidestand is down. | |
Vehicle Speed | When standard mode is selected, speed displays in miles per hour. | |
When metric mode is selected, speed displays in kilometers per hour. |
Lamp | Indicates | Condition |
---|---|---|
Low Oil Pressure | This lamp illuminates when oil pressure drops below a safe operating pressure while the engine is running. If this lamp illuminates while the engine is running above idle speed, turn the engine off as soon as safely possible and check the oil level. If the oil level is correct and the lamp remains on after the engine is restarted, turn the engine off immediately. See your dealer. | |
Low Battery Voltage | This lamp illuminates when battery voltage is low. Turn non-essential accessories off to conserve power. Make sure the charging system is operating properly. See Battery Charging Rate Low or Battery Discharges. |
© Copyright Polaris Industries Inc. All rights reserved.