Content Source:
2020 Scout/Scout Sixty Owner’s Manual (9929430 R03) > Maintenance
Chapter
IMPORTANT |
The Owner's Manual for this vehicle contains
warnings, instructions and other information you must read and fully
understand
before safely riding or performing maintenance
on this vehicle.Always follow the warnings and instructions in Owner's
Manual.
Click the CONTENTS link above for the Table Of
Contents, or download a full PDF of the Owner Manual in the Owner
Support area
of Polaris.com
|
Electrical Precautions
Be aware of the following
precautions regarding the electrical system to avoid disruption of
electrical signals and possible
system malfunction.
- DO use ONLY genuine
INDIAN MOTORCYCLE parts and accessories designed for your model, and
follow the instructions provided.
- DO use the accessory
power jack provided (if equipped).
- If it is necessary
to provide power to an item that does not use one of the previously
mentioned power jacks, connect to the
“hot” side of the starter solenoid with an
inline fuse, and connect the ground wire to the chassis ground located
at the left
rear section of the frame under the seat.
- DO NOT splice or
cut any wires.
- DO NOT tap in to
any power or ground on the motorcycle unless specifically directed
to do so by the INDIAN MOTORCYCLE instructions
that come with the kit.
- DO NOT back-probe
electrical connectors on the vehicle unless directed to do so by the INDIAN MOTORCYCLE Service Manual.
- DO NOT power any
accessories from the diagnostic connector.