| NOTE |
| Before updating the Display, always export your existing rides and waypoints to a USB drive to avoid losing them. |
To update the software, do the following:
On your Personal Computer
- Go to https://ridecommand.polaris.com/en-us/update .
- Log into your account, or create a new account.
- Using the Vehicle Identification Number (VIN), add your new Polaris vehicle to your Garage.
- Locate and download the latest software to a USB flash drive (8+ GB).
On your Vehicle
- Connect the USB flash drive to the USB cable and power up your vehicle.
- On the RIDE COMMAND® display, select the Settings menu on your display by pressing the POLARIS icon at the top of the screen.
- Select General Settings, then Update Software.
- Select the file you wish to load (use date listed in the file name to determine most recent file).
- Select Yes to restart display (restart required).
Error Messages
If an error occurs while updating your software, perform one or all of the following actions to resolve the issue:
- Remove and reconnect the USB flash drive securely.
- Make sure the display files are not inside a folder on the flash drive.
- Make sure only display files are on the flash drive. Remove any other files if necessary.
- Try using a different USB flash drive.
