Content Source:
2019 RZR RS1 Owner’s Manual (9929364 R01) > Maintenance Chapter
IMPORTANT |
The Owner's Manual for this vehicle contains
warnings, instructions and other information you must read and fully
understand
before safely riding or performing maintenance
on this vehicle.Always follow the warnings and instructions in Owner's
Manual.
Click the CONTENTS link above for the Table Of
Contents, or download a full PDF of the Owner Manual in the Owner
Support area
of Polaris.com
|
Transmission (Main Gearcase)
Always check and change
the fluid at the intervals outlined in the Periodic Maintenance Chart
section. Refer to the Gearcase
Specifications Chart section for recommended lubricants,
capacities and torque specifications.
Fluid Check
The fill plug
is located on the rear of the gearcase. Maintain the
fluid level at the bottom of the fill plug hole.
- Position the vehicle
on a level surface.
- Remove the fill plug.
- Check the fluid level.
- Add the recommended
fluid to the bottom of the fill plug hole. Do not overfill.
- Reinstall the fill
plug. Torque to specification.
Fluid Change
The drain plug
is located on the bottom of the gearcase. Access the
drain plug through the drain hole in the skid plate.
- Remove the fill plug.
- Place a drain pan
under the drain plug.
- Remove the drain
plug. Allow the fluid to drain completely.
- Clean the drain plug.
- Reinstall the drain
plug. Torque to specification.
- Add the recommended
fluid to the bottom of the fill plug hole. Do not overfill.
- Reinstall the fill
plug. Torque to specification.
- Check for leaks.
Discard used fluid properly.