Content Source: 2019 Slingshot Owner’s Manual (9928978 REV 05) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Auxiliary Headlamp Aim Adjustment (USA)

  1. Verify that headlamp aim inspection conditions are met. See Headlamp Aim Inspection Conditions.
  2. Position the vehicle on a level surface with the nose 5 ft. (1.5 m) from a wall .Image
  3. Move the ignition switch to the ON position to turn the lights on.
  4. Observe the auxiliary headlight beam display on the wall. The lower edge of the beam displays with a multi-colored halo.
  5. Measure from the floor to the bottom edge of the halo’s green band as illustrated. When the beam is properly adjusted, this measurement should be in the following range:
    • 3.75-5.75” (9.5-14.6 cm) for base model
    • 4.75-6.75” (12-17.1 cm) for SL model
  6. To adjust a headlight beam, open the hood and turn the two headlamp adjustment screws simultaneously and equally.Image
    • Clockwise adjustment raises the beam
    • Counter-clockwise adjustment lowers the beam

© Copyright Polaris Industries Inc. All rights reserved.