Content Source: 2019 850 PRO-RMK / SKS 155 Owner’s Manual (9928946 R01) > Features Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

QUICKDRIVE Belt

The QUICKDRIVE drive system (if equipped) utilizes a drive belt that exhibits extraordinary performance and service life when the belt is handled properly before and during installation. Improper handling of this belt can result in a shortened service life.
Inspect and change the belt at the intervals outlined on Periodic Maintenance Interval Table. See QUICKDRIVE Belt Condition (if equipped) for inspection procedures.
Special tools are required to remove and install the QUICKDRIVE belt. Your POLARIS dealer can assist with this service, or refer to the instructions provided with the purchase of a new belt.

Belt Handling

  • Store a new belt in original packaging. Remove only when ready for installation.
  • Avoid belt contact with solvents, oils or chemical cleaners.
  • Do not crimp or bend the belt to a diameter less than the upper sprocket.
  • Do not back-bend the belt.
  • Do not twist or flip the belt.
  • Do not use a pry bar or screwdriver to remove or install the belt.
  • Always break in a new belt properly. See Drive Belt Break-In for belt break-in procedures.

© Copyright Polaris Industries Inc. All rights reserved.