Content Source: 2019 800 Titan Adventure Owner’s Manual (9928876 R01) > Operation Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Throttle Safety Switch

The throttle safety switch is designed to stop the engine whenever all pressure is removed from the throttle lever and the throttle cable or valves do not return to the normal closed position.

Image
WARNING
Operating the snowmobile with a faulty throttle safety switch can result in serious injury or death in the event of an accident. If the throttle safety switch does not shut off the engine during a carburetor/throttle system malfunction, immediately push down the engine stop switch. Do not start the engine again until the malfunction has been corrected by your dealer.
Test the throttle safety switch system daily before operation.
  1. Sit on the seat.
  2. Start the engine and allow it to idle.
  3. Hold the throttle lever pin stationary by exerting pressure on the pivot pin in the direction shown in the illustration.
  4. Apply a slight amount of throttle. A properly functioning switch must shut down the engine.

© Copyright Polaris Industries Inc. All rights reserved.