Suspension Troubleshooting

Content Source: 2019 800 Titan Adventure Owner’s Manual (9928876 R01) > Troubleshooting Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Suspension Troubleshooting

Problem	Solution
Rear suspension bottoms too easily	Refer to the Suspension Quick Set-Up Guide for details. Revalve rear track shock (see your dealer).
Rides too stiff in rear	Refer to . Check for binding suspension shafts and grease all pivot points.
Too much weight transfer when climbing	Refer to the Suspension Quick Set-Up Guide for details.
Too little weight transfer when climbing	Refer to the Suspension Quick Set-Up Guide for details.
Machine darts from side to side	See your dealer for ski alignment inspection. Make sure spindles and all steering components turn freely. Check for excessive play in steering assembly (your dealer can assist). Ensure skags are straight on skis.
Front end pushes	Refer to the Suspension Quick Set-Up Guide for details. Check for worn skags. Check for binding front suspension shafts and steering components, grease all pivot points (elevate front of snowmobile). Increase IFS preload (if equipped).
Steering is heavy	Refer to the Suspension Quick Set-Up Guide for details. Make sure spindles and all steering components turn freely. See your dealer for ski alignment inspection. Check skags and skis for damage.