Content Source: 2019 800 Titan Adventure Owner’s Manual (9928876 R01) > Gauge Chapter
| IMPORTANT |
|
The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual. Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com |
The over-temperature indicator on the standard instrument
cluster will illuminate when the engine is overheating. Take action to cool the engine.
See Engine-Cooling
Actions.
The indicator will flash when engine temperature reaches critical
levels. Stop the engine immediately.
The engine temperature scale 
located on the right side of the PIDD screen
changes to RED and the
check engine temperature indicator 
located
on the top left of the screen illuminates when the engine is overheating.
Take action to cool the engine. See Engine-Cooling
Actions.
The indicator will flash when engine temperature reaches critical
levels. Stop the engine immediately.
|
Engine Temperature Protection Modes |
|
|---|---|
|
Hot Lamp |
Threshold* |
|
ON |
Lamp illuminates: Idle = 201° F (94° C), WOT = 185° F (85° C) |
|
FLASHING |
Lamp Flashes, Engine Turns Off: Idle = 215.6° F (102° C), WOT = 201° F (94° C) |
|
* Only the minimum (idle) and maximum (WOT) parameters are listed. |
|
| NOTICE |
|
If you must continue to operate while the indicator light
is illuminated, drive slowly
and stop the engine frequently to allow it to cool down.
|
© Copyright Polaris Industries Inc. All rights reserved.