Content Source: 2019 550 WideTrak LX Owner’s Manual (9928875 R01) > The Perfect Fit Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Handlebar Adjustments

Handlebar Angle

  1. Securing the handlebar clamp bolts with an Allen wrench, loosen each of the four nuts.
    caution
    Take care to avoid damaging hand warmer/brake switch wires when moving components.
  2. Adjust the handlebar forward or rearward to the desired angle.
  3. Be sure the handlebar, brake lever and throttle lever operate smoothly and do not hit the gas tank, windshield or any other part of the machine when turned fully to the left or right. If necessary, adjust the left and right hand controls. See Left Hand Control Alignment.
  4. Tighten the handlebar clamp nuts. Do not over-torque.
    TORQUE
    15-17 ft-lbs (20-23 Nm)

© Copyright Polaris Industries Inc. All rights reserved.