Content Source:
2019 550 Indy 144 Owner’s Manual (9928872 R01) > Features and Controls
Chapter
| IMPORTANT |
|
The Owner's Manual for this vehicle contains
warnings, instructions and other information you must read and fully
understand
before safely riding or performing maintenance
on this vehicle.Always follow the warnings and instructions in Owner's
Manual.
Click the CONTENTS link above for the Table Of
Contents, or download a full PDF of the Owner Manual in the Owner
Support area
of Polaris.com
|
Convertible Passenger Seat
Installation
- Locate the armrest
latches on the back of the chair above the armrests. Lift both latches
simultaneously and swing the armrests
to the back of the seat.
- Insert the base of
the convertible passenger seat into the rack on the snowmobile, tilting
it forward as shown.
- Lightly press the
armrests downward while sliding the seat forward until it stops.
- Swing both armrests
forward to the riding position to lock the convertible passenger seat
to the vehicle.
- Check both latches
to ensure they are completely latched.
- Test the seat locks
to make sure the passenger seat is securely fastened to the vehicle.
Push and pull the passenger seat
in an attempt to move it. The seat should
not move. If the seat moves during this test, remove the seat and
reinstall it.
Retest for a secure lock.
- If the seat locks
fail to keep the seat solidly secure to the vehicle, do not carry
a passenger. Your POLARIS dealer can provide
service.
| TIP |
| After the convertible passenger seat is installed, access any rear
side luggage bags (if installed) by swinging the armrests
rearward. |
