Content Source: Polaris Interactive Digital Display (9928803 R01) > Features and Controls Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Diagnostics

Select DIAGNOSTICS from the menu to:

  • View Fault Codes
  • View Potential Corrective Measures

Image
To access the DIAGNOSTICS, do the following:
  1. Press any key to display the PIDD screen icons.
    NOTE
    For snowmobiles, only active faults display and the engine must be running to view faults. If the Malfunction Indicator Light (MIL) illuminates, stop the snowmobile but do not stop the engine if you wish to view the faults.
  2. Press Key 3 to display the main menu options.
  3. Toggle to DIAGNOSTICS. Press Key 3 to select.
  4. If any faults have been detected, a description screen displays with the number of faults listed at the bottom center of the display.
  5. Press Key 2 or Key 4 to scroll through the faults.
    NOTE
    Faults display if they were active at least once during the current ignition cycle. If the Malfunction Indicator Light (MIL) is ON, one or more of the faults in this list is an active fault.
  6. Press Key 5 to exit.
  7. For a system diagnostics inspection and/or service, please see your authorized Polaris dealer.

© Copyright Polaris Industries Inc. All rights reserved.